Basic Boat Info
Make: Tracker
Model: Bass Pro 50th Anniversary Bass Tracker
Year: 2022
Category: Power
Construction: Aluminum
Dimensions
Length: 16'8 ft
Length Overall: 16'8 ft
Beam: 6'5 ft
Dry Weight: 780 lb
Deadrise: 6 °
Engines / Speed
Engines: 1
- Type: Outboard
Tanks
Fuel Tanks: 1
Fuel Tank Capacity: 6 gal
Other
Maximum Number Of Passengers: 3
Boat Class: Bass Boats, Aluminum Fish Boats, Freshwater Fishing
More Info :
Manufacturer Website
Additional Specs
- Length:16' 8"
- Beam: 6' 5"
- Bottom Width: 4' 6"
- Max. Recommended HP: 50 HP
- Fuel Capacity: 6 gal.
- Max. Person Capacity: 3 persons
- Max. Person Weight: 555 lbs.
- Max. Person, Motor & Gear Weight: 1025 lbs.
- Interior Depth: 15"
- Transom Height: 22.5"
- Deadrise At Bow: 13 degrees
- Deadrise At Transom: 6 degrees
- Hull Material: 0.1 5052 marine alloy
- Average Dry Weight: 780 lbs.
- Average Package Weight: 1705 lbs.
- Package Height: 6' 0"
- Package Width: 6' 8"
- Towing Length: 23' 2"
- Storage Length (w/Outboard Trimmed Down): 20' 1"
Standard Features
Comfort, Convenience & Peace of Mind
- Backed by the TRACKER® PROMISE—the best factory warranty in aluminum boats
- Limited lifetime hull warranty
- NMMA® certified
- Flotation meets or exceeds NMMA® & U.S. Coast Guard requirements
- Bow & stern eyes
- 4 cleats
- Motor-stop safety lanyard
- Fire extinguisher
- Horn
- Paddle
Livewell System
- 9-gal. (34.07 L) aerated livewell molded into front of console
- 500 GPH (1,892.71 LPH) aerator/fill pump
- Molded 1-piece construction w/rounded corners for easy cleanup & to protect your catch
Trolling Motor
- Minn Kota® Edge® 12V, 45-lb. (20.41 kg) thrust, 45" (1.14 m) shaft, foot-control trolling motor
- Thru-bolted trolling motor mount for durability
Console
- Custom burl-finished dash panel w/laser-engraved BPS® 50th Anniversary logo & handwritten special note & signature from our Founder, Johnny Morris
- Lowrance® HOOK2 4x swivel color fishfinder w/transducer
- Sport steering wheel
- Single-cable, no-feedback rotary steering
- 1-piece rotomolded console w/tinted windscreen, integrated livewell, drink holder & 12V outlet
- Switch panel
- Mercury® control box
- Navigation lights, aerator & bilge switches
Interior
- Elevated bow & aft casting decks w/storage below bow deck
- 2 pedestal seat base locations
- 100% composite fishing seats w/contoured hinges & snap-off cushions
- 2 folding fishing seats
- Port side rod holders w/organizer for 4 rods to 7' (2.13 m)
- Driver & passenger seats w/storage below
- Aft deck storage
- 16-oz. (.45 kg) marine-grade, fishing-friendly carpet throughout
Performance
- Pressed-in keel & strakes for optimal performance
- Factory-matched, performance-tested aluminum propeller
Construction & Exterior
- Exclusive Anniversary White DIAMOND COAT™ 2.0 finish w/industry-exclusive powdercoat & clearcoat for brilliant durability
- Commemorative tan & black upholstery w/embroidered BPS® 50th logo on front & embossed BPS logo on seat backs
- Retro graphics package w/original BASS TRACKER® logo & BPS® 50th Anniversary badging
- Rugged, all-welded, 2-piece aluminum hull w/pressed-in strakes & chines for structural strength & handling
- Robotically welded, all-aluminum box-beam transom w/corner braces welded in to unitize & strengthen the hull
- Welded-in longitudinal stringer system for full-length support along the running surface
- Expanding foam injected into hull cavities for added hull stiffening, flotation & a quieter ride
- 2" (5.08 cm), heavy-duty extruded 1-piece gunnel for structural strength & rigidity
- Pressure-treated floor & decks w/limited lifetime warranty
- Flush-mount, carpeted, all-aluminum compartment lids for structural rigidity, tight fit & long-term durability
Electrical
- 800 GPH (3,028.33 LPH) bilge pump
- Stowable navigation lights w/LED courtesy light at bow
- Bow & console courtesy lights
- 2 battery trays
- Interstate® batteries: 1 cranking & 1 trolling
- 12V trolling motor harness & receptacle
- Wiring system wrapped in abrasion-resistant protective conduit
Cover
- Custom-fit tan boat & motor covers w/original BASS TRACKER® logo on motor cover
Trailer
- Custom-fit, single-axle trailer powdercoated w/GALVASHIELD® Impact corrosion & chip protection for improved durability
- Chrome wheels & matching hub covers w/13" (33.02 cm) radial tires
- Hubs designed for quick & easy hub lubrication
- Space-saving swing-away tongue to reduce storage length
- Pivot-up locking jack w/swivel wheel
- Heavy-duty winch w/nylon strap & bow safety strap
- Outboard motor support to reduce hull & transom stress while towing
- Heavy-duty upright load guides for easy, centered loading
- Carpeted bunks to protect hull
- Submersible LED lighting
- Nylon tie-down straps (supplied w/boat package)
- Safety cables
